alpine-wiki

Alpine Install: from a USB to any computer single disc and only alpine boot

Overall description: Alpine Installation from a official iso, dumpet to a usb source device media, and installed to a bare metal computer no matter if include UEFI and will be the only OS installed to boot.

Means you will install Alpine as the only OS in a PC computer from USB media.

Warning This method only works for most modern pc vbeyond 2016 and recents.

Requirements

A usb stick to write the ISO source media file downloaded
In the new machine we need an USB port free and able to boot
In the new machine we need support for booting from USB devices
In the new machine we need at least 512Mb of RAM, but required 2Gb of RAM for desktop/graphical applications
In the new machine we need target media with at least 2G of hard disk, but required 10G for desktops
Will need to previously downloaded and burned the Source media ISO file from https://alpinelinux.org/downloads/

Downloading the source medium to install

In this case, your PC wil have UEFI or must be beyond 2016’s you will need 64-bit iso, the download URL will be:

http://dl-cdn.alpinelinux.org/alpine/v3.17/releases/x86_64/alpine-standard-3.17.0-x86_64.iso

How to download usin Graphical browser: point the web browser to that url and the download of the iso file will start. A file with .iso extension type, will be downloaded commonly into the Download directory.

How to download usin Command line method: in unix-like terminal (MAC/Linux) execute: cd $HOME;wget -c -t8 --no-check-certificate http://dl-cdn.alpinelinux.org/alpine/v3.17/releases/x86_64/alpine-standard-3.17.0-x86_64.iso, and unless the case of GUI, your .iso file wil be direclty in your home directory.

Writing the source medium to your USB

Using balena-etcher-electron to flash the USB drive from any system, its easy, simple and available for all OSs.

*Warning this guide assume only one hard drive as /dev/sda and only one USB as /dev/sdb

download the program balena-etcher-electron (there are portable versions)
Run the program balena-etcher-electron as root in the graphical session
Click “select image” icon, open the downloaded image file
Plug the USB drive into the computer, it will automatically show as sdb
After it balena-etcher-electronshows the USB as “sdb”, clickflash
Wait a while and when finished, close the program
Take out the USB and place it on the installation target computer in a port

Note this method only works on recent MacOs 10.12+ or recent Linux 4.9+ installations

You can also made it manually, open your terminal program, move to the place directory where ISO downloaded are placed and cp to the USB device:

umount /dev/sdb; cp alpine-standard-3.17.0-x86_64.iso /dev/sdb

Booting the Alpine ISO disc

When the machine start, you must be sure to choose the right booting drive (commonly named USB boot drive or USB hard disk), so the disc/iso will boot and after a while a command line shell will show you:

Note When starting Alpine it will ask for the login, just typing root and pressing enter allows you to start:

Warning Tip: If your system is not configured to boot from a USB drive, it must be configured in the BIOS/UEFI, ask/search to your vendor or technical support, Toshiba computers need to hit F1 to choose boot medium, DELL must hit F11 to choose medium for example, and so and so

Installing after boot up

Warning if you do not download the extended ISO it may require internet.!!!

runing the setup script

After entering the root environment and gets the console prompt installation media, you must perform these commands, that will:

prepare disk sizes, boot partiton to 500 megs
perpare swap sices, swap partition to 2 Gigs
setup boot loader to grup (if wants lilo just change to lilo)
and run setup script to configure and process instalation:

export BOOT_SIZE=500

export SWAP_SIZE=2048

export BOOTLOADER=grub

setup-alpine

This will start some questions, these are in the following order:

keyboard and variant, example for Latin is esand afteres-winkeys
hostname: just hit enter, it’s the name of the computer.
Network options: select the eth0 one that is the network cable and answer dhcp.
DNS Options: It is recommended to use 8.8.8.8 and none for the domain
Time zone options: Just use the suggested defaults.
Proxy Options: Use noneif you are connecting directly to the Internet.
SSH Options: Use opensshthe package that already comes in the middle.
NTP Options: Use chronythe packet already in the middle.
Mode: Select sys to install the system on disk.
Disk Options: Use sda as the entire hard drive present will be used.

After answering sys to the questions about the drive, and since there will only be one drive, answering sda on which drive to use, this will create and leave your hard drive as follows:

/dev/sda1 as BOOT in 500Mb in /boot
/dev/sda2 as SWAP in 4Gb
/dev/sda3 as ROOT in 200Gb in / (approximately or rest of space available)

In a few minutes everything will be ready to use ofering a console when boot new system.

Finishing the installation

After all of the scripts in the setup end, a “reboot” will be offered, just type “reboot” and press enter, remove the boot media and newly installed system will be booted.

You cannot see a graphical window system? take it easy and get calmed down.. in Alpine all are made by the right way.. so if user need a desktop.. user can install a desktop

The wifi setup after install

Please follow the guide alpine-tutorial-wifi-routering.md, you will need to download the needed packages manually from another device and then but it on the installed Alpine computer using USBstorage external device.

NOTES: offline mode

If you cannot setup a internet connection you cannot install Alpine linux, unless you used 64bit intel/amd and “extended” iso install media. Most of the packages need to setup this procedure are not included in standard images, specially those for ARM devices like RasberryPi ones becouse WIFi setup.

How to use this guide

This guide is for install process, many parts will need you understand minimal knowledge of linux.

This guide assumed you have a serial port allowed in the targeted computer, also its important you shuold understand the way of the configuration in this guide.

Warning Some Linux or/and Mac terminals have security cut/paste locks, so if you paste, the first line will be preceded by garbage, check always the first char of your paste.

Licensing clarifications

CC BY-NC-SA: the project allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creators involved. If you remix, adapt, or build upon the material, you must license the modified material under identical terms, includes the following elements:

BY Credit must be given to the creator of each content respectivelly, starting at the first contributor.
NC Only noncommercial uses of the work are permitted, with exceptions if you fill an issue here!
SA Adaptations must be shared under the same terms, you must obey this terms and do not change it.

https://codeberg.org/alpine/alpine-wiki/src/branch/main#license