Alpine Linux can be installed via many ways, the most common ones are listed here, for more information see last section of this document.
Setup_modes of Alpine operation: Alpine Linux is designed to run from RAM directly, which means the download image is already a fully installed, but a minimally configured system. Review the Setup_modes of Alpine operation for permanent installation options on most devices.
Alpine Linux has low system requirements. Nowadays almost hardware is supported, More requirements documentation can be found on the Requirements wiki page:
More documentation is available on the Memory requirements section wiki page.
More documentation regarding requirements is available on the Storage requirements section wiki page
The majority of GPUs are supported, but for advanced features, 3D acceleration is managed by the MESA project:
More documentation available on the Peripheral requirements section wiki page.
We have here many ways listed how you can put Alpine Linux in your computer device, PLEASE CHOOSE A USE CASE MOST CLOSE TO YOUR SETUP:
UEFI or BIOS hardware and will be installing Alpine via a CD/DVD drive.
Alpine Install: from a tarball to a bootable ARM device, install Alpine on an ARM based device. Use if you have a ARM based network capable install device.
Alpine on ARM for those who need to dump to ARM based hardware
If the computer does not automatically boot from the desired device, one needs to bring up the boot menu selection for choosing the media to boot from. Depending on the computer the menu may be accessed by quickly pressing pressing a key repeatedly when booting starts. Sometimes you need to press the button before starting the computer and hold it down during bootup. Typical keys are: `F9`-`F12`, sometimes `F7` or `F8`. If these don’t bring up the boot menu, it may be necessary to enter the BIOS configuration and adjust the boot settings. Typical keys are: `Del` `F1` `F2` `F6` or `Esc.`
The all popular 32 bit intel (i386 pc 32bit) and x86_64 (i686 pc 64bit and amd64)compatible (both)
For the PowerPC devices with pure little-endian mode, mostly for POWER8 and POWER9
Alpine Install: from a disc to a any computer single only boot, install Alpine on a real (i.e. ot virtual) modern machine by burning a disc that will boot if you have UEFI or BIOS hardware and will be installing Alpine on it via a CD/DVD drive.
Alpine Install: from a usb to a any computer single only boot, install Alpine on real (i.e. ot virtual) modern machine by creating a USB drive that will boot if you have UEFI or BIOS hardware and will be installing Alpine on it via a USB drive.
ARM based hardware that does not have CD/DVD/BR boot support, only execution state of the ARMv7 devices machines. Including video game consoles; the newer ARM hard-float for newer, more powerful, 32-bit as well as 64-bit devices.
The 64-bit ARM only execution state of the ARMv8 device machines.
Alpine Install: from a usb to a any computer single only boot, install Alpine on a real (i.e. not virtual) modern machine by creating a USB drive unit that will boot if you have UEFI or BIOS hardware and will be installing Alpine on it via a USB drive.
Alpine on ARM Main reference for ARM devices
For the Super powered IBM mainframes, especially IBM Z and IBM LinuxONE servers
Alpine Install: from a disc to a any computer single only boot, install Alpine on real (i.e.not virtual) modern machine by burning a disc that will boot if you have UEFI or BIOS hardware and will be installing Alpine on it via a CD/DVD drive.
Alpine Install: from a usb to a any computer single only boot, install Alpine into real (i.e.not virtual) modern machine by creating a USB drive unit that will boot if you have UEFI or BIOS hardware and will be installing Alpine on it via a USB drive.
Previous required | What’s next to read |
---|---|
Alpine newbie | Alpine Install: from a disc to a virtualbox machine single only |